Over the past 50 years bicycles have evolved from simple 1 and 3-speed models to sophisticated computer-designed machines. Today, performing service on bicycles requires in-depth knowledge as well as the proper tools. For those 50 years, Ridge Cycle has been performing repairs as simple as repairing a flat to frame repair. So you can be assured that your bicycle will be quickly and expertly serviced.
We also do bike fitting so you can get the most out of your bicycling experience.

The Ridge Cycle Complete Tune-Up:

Area 1: Wheels
Wheels properly and securely mounted in frame. Adjust bearing tolerance in front and rear hubs and inspect for bent axles and signs of other internal damage. Rims trued laterally for better braking. Tires inflated to proper pressure.

Area 2: Bottom Bracket and Crank
Adjust bearing tolerance in the bottom bracket and tighten chain rings and crank arms. Inspect and align chain rings. Tighten pedals. Chain checked for wear and lubricated.

Area 3: Brakes
Brake pads checked for wear and replaced if necessary.* Levers inspected, aligned, and tightened. Front and rear brakes lubricated and adjusted for best performance. Cables and housings inspected and replaced if necessary;* cables lubricated. *Parts are not included

Area 4: Steering
Headset inspected and adjusted. Fork inspected for damage. Handlebars and stem properly aligned, inserted, and secured.

Area 5: Shifting and Gear System
Inspect, lubricate, and adjust front and rear derailleur. Check rear derailleur hanger for alignment. Cables and housings inspected and replaced if necessary* and cables lubricated. *Parts are not included

Area 6: Bike Inspection & Safety Check
Frame checked for damage; seat post checked for minimum allowable insertion into frame and properly secured; seat clamp tightened; check mounting integrity of accessories.

---

The Ridge Cycle Complete Overhaul:

All items listed in the "Complete Tune-Up" with the addition of disassembly and degreasing the front and rear hubs. Chain, cogs, front and rear derailleur are removed and degreased. Crank-set and bottom bracket are removed and degreased. Then the bicycle is reassembled with fresh grease.

---

---